Table of Contents
A certificate of analysis, or COA, is the lab report that shows what is in a CBD product — and whether the label is telling the truth. Once you know where to look, reading one takes five minutes. This walkthrough shows you how to check the lab, match the batch, read the potency numbers, and spot the red flags.
Think of it this way: a label is a promise, and a COA is the receipt. Brands can print almost anything on a bottle, but the lab report comes from someone with no stake in the sale. If a brand will not show you one, that tells you plenty.
What is a COA, and where do I find one?
A COA is a report from an independent testing laboratory for one specific batch of a product. It lists how much CBD and THC the sample contained, plus the results of safety tests for things like pesticides, heavy metals, and mould.
Reputable brands post the COA on the product page, link it from a QR code printed on the label, or send it when you ask. It should be a PDF from the lab itself, not a screenshot on the brand’s Instagram. If you have to email three times and still get nothing, take the hint.
Step 1: Check the lab before you read the numbers
The first thing to look at is not the CBD number. It is who did the testing.
A trustworthy COA comes from an independent, third-party laboratory — one that has no financial connection to the brand. The gold standard to look for is ISO/IEC 17025 accreditation, the international standard for the competence of testing laboratories. Accreditation is granted by an accreditation body (in the US, often A2LA) for a defined scope of tests, and it means the lab’s people, equipment, and methods have been independently assessed. Note the word: labs are accredited to ISO/IEC 17025, not certified — and the accreditation covers specific tests, not the lab in general, so check that cannabinoid testing is inside its scope.
Quick checks for this step:
- The lab’s name, address, and contact details appear on the report.
- The report states the lab’s accreditation and its scope covers cannabinoid testing.
- The lab is independent — not owned by, or sharing an address with, the brand.
- You can look the lab up online and find a real business, not just a logo.
Step 2: Match the batch number
Every COA belongs to one batch, and one batch only. Find the batch or lot number on your bottle or box, then find the same number on the COA. They must match. If they do not, the report might describe a completely different product — possibly one that tested well, while yours never got tested at all.
While you are there, check two more details: the product name on the COA should be the product you bought, and the test date should be recent. A report from three years ago says nothing about the bottle in your hand. A COA older than about a year deserves a raised eyebrow, and one report reused across a whole catalogue is not real testing.
Step 3: Read the potency table
It is usually called the cannabinoid profile or potency analysis, and it lists each cannabinoid the lab measured — CBD, CBDA, THC, THCA, CBG, CBN — in milligrams per gram, milligrams per unit, or percent by weight.
Three numbers matter most:
- Total CBD. Look for a “total CBD” line. It combines CBD with CBDA, the raw form of CBD found in the plant, which converts to CBD. Compare this figure with the label. If the bottle says 1,000 mg and the report says 620 mg, the label is not telling the truth. Small differences are normal — every measurement has a margin of error — but a big gap is a failed promise.
- Delta-9 THC. For a hemp product, this is the legal line. Under the 2018 Farm Bill, hemp is defined as cannabis with no more than 0.3% delta-9 THC on a dry weight basis, as of November 2026. If the COA shows more than that, the product is not hemp under federal law, whatever the label claims. (Federal hemp rules are being revised by Congress, so check the current law where you live — our write-up of a lab study on mislabeled hemp delta-9 products shows why this check matters.)
- Milligrams per serving. A bottle total means little on its own. Divide by the number of servings, or look for a per-serving line, so you know what one dose actually contains.
One more thing to notice: a full-spectrum product should show small amounts of several cannabinoids, not just CBD. An isolate product should show CBD and almost nothing else. If the profile does not match what the label claims the product is, ask questions.
Step 4: Decode ND, LOD, and LOQ
The abbreviations look like a secret code, but they are just the lab telling you the limits of its own equipment.
- ND — not detected. The lab found nothing above its detection limit. This does not mean zero. It means “none we could see with this method.” A product labelled “THC-free” with ND next to THC is not guaranteed to contain absolutely no THC.
- LOD — limit of detection. The smallest amount the method can reliably spot. Below this, the lab cannot tell signal from background noise, so the result is reported as ND.
- LOQ — limit of quantitation. The smallest amount the method can measure accurately, with acceptable precision. The LOQ sits above the LOD, because proving something is there is easier than saying exactly how much of it there is.
- <LOQ — below the limit of quantitation. The substance was detected, but at a level too low to put a reliable number on. This is different from ND, and a good report keeps the two separate.
These definitions come from the ICH Q2(R2) guideline on validating analytical procedures, the international reference labs use for detection and quantitation limits. A good COA prints the actual LOD and LOQ values next to each result. If it does not, an ND result is hard to judge — you have no idea how low the lab could actually see.
Step 5: Check the safety panels
Potency is only half the story. A complete COA also tests for contaminants, and each panel should show a PASS result or a value below the stated limit. Look for:
- Pesticides — residues from growing and processing.
- Heavy metals — lead, arsenic, cadmium, and mercury, which hemp plants readily absorb from soil.
- Residual solvents — chemicals left over from extraction.
- Microbials — mould, yeast, and bacteria such as E. coli and Salmonella.
- Mycotoxins — toxins produced by mould.
A COA that shows potency and skips every safety panel is incomplete. Limits vary by state, so the report should state the limit it tested against — a PASS with no limit shown says little. And remember what the FDA says about CBD products: the agency has approved only one CBD product, a prescription drug for rare, severe forms of epilepsy, and it has flagged real concerns including liver injury and interactions with other medicines. A clean COA does not turn a CBD product into an approved medicine.
Red flags that mean “put it back on the shelf”
Walk away if you see any of these:
- No COA at all, or a QR code that leads nowhere.
- A COA issued by the brand’s own lab, or a lab you cannot verify exists.
- A batch number that does not match your product, or no batch number at all.
- Potency far below the label claim, or THC above the 0.3% line.
- Only potency tested, with no safety panels.
- A report that is years old, or one report reused across the whole catalogue.
- A “COA” that is really a marketing sheet with no lab name, no methods, and no limits.
None of this makes you a chemist. It makes you a shopper who checks the receipt. Our essential tips for buying CBD products and our guide to avoiding ineffective CBD products cover the rest of the buying decision, and our list of CBD brands you can trust is a good place to start if you would rather begin with companies that already publish full, batch-matched reports. You will find more guides like this one in our CBD Guides hub.
Frequently asked questions
What does ND mean on a CBD lab report?
ND means “not detected” — the lab found nothing above its detection limit for that substance. It does not mean zero, and it does not mean the substance is absent. It means the amount, if any, sits below the smallest level that particular test can reliably spot, so always check the detection limit printed alongside it.
How do I know if a COA is real?
Check that it comes from a named, independent lab you can look up online, that it carries ISO/IEC 17025 accreditation for cannabinoid testing, and that the batch number and product name match the item in your hand. A genuine COA is a lab PDF with methods and limits stated, not a branded graphic with a few numbers on it.
What is a good potency result on a COA?
A good result is one that matches the label. Small differences are normal because every measurement carries a margin of error, but the total CBD on the report should sit close to the milligrams promised on the bottle. If the report shows far less than the label claims, or far more, the product is not what it says it is.
Should a COA show THC?
Yes — always. Even a product marketed as THC-free should show a THC line reading ND or below the quantitation limit. A report with no THC line at all has skipped the single most legally important test on the page, and for hemp products the delta-9 THC result must sit at or below 0.3% by dry weight.
What if a brand will not share a COA?
Treat that as your answer. Third-party testing is the basic quality check in this industry, and any brand selling CBD should be able to produce a batch-matched report on request. If it cannot or will not, buy from a company that can — there are plenty that publish their reports openly.
This article is general information, not medical advice. If you use CBD alongside medication or have a health condition, talk to your doctor first — and you can read our full medical disclaimer.
Affiliate Disclosure
The CakeHeights Editorial Team is committed to providing accurate, research-backed information about cannabis and hemp products. Some links on this page are affiliate links, meaning we may earn a commission at no extra cost to you if you make a purchase through them. Our recommendations are based on independent research, testing, and analysis. We only promote products we believe offer genuine value to our readers. Learn more →