Table of Contents
Vape juice — also called e-liquid or e-juice — is the liquid that a vaping device heats into the aerosol you inhale. Every vape juice on the market is built from the same short list of components: a base of propylene glycol (PG) and vegetable glycerin (VG), flavorings, and usually nicotine. That is the whole recipe. Everything else — the thousands of flavors, the nicotine strengths, the ratios — is variation on those four ingredients. This guide is the overview; the deep dives are linked as we go.
What vape juice is made of
Four components, in every bottle:
- Propylene glycol (PG) — a thin, nearly tasteless liquid that carries flavor well and gives the “throat hit” that ex-smokers recognize. Some people are sensitive to it.
- Vegetable glycerin (VG) — a thicker, slightly sweet liquid that produces denser vapor and a smoother hit. High-VG liquids wick more slowly.
- Flavorings — food-grade flavor concentrates, the same kinds used in candy and drinks. Food-grade means approved for eating — it does not automatically mean evaluated for inhaling, which is why flavoring safety is its own topic (see the ingredients guide).
- Nicotine (optional) — in freebase or salt form, at strengths from 0 mg/ml up to 50 mg/ml in the US. Nicotine-free liquids contain the other three components only.
Some liquids also contain a small amount of distilled water to thin a high-VG blend, and most contain sweeteners or cooling agents — but PG, VG, flavorings, and nicotine are the recipe. Our ingredients deep-dive covers all seven components in detail, including what is known about inhaling each one. For the PG/VG trade-off specifically, see our PG vs VG comparison.
Freebase vs nicotine salts: the distinction that matters
Nicotine comes in two forms, and using the wrong one in the wrong device is the most common beginner mistake:
| Freebase nicotine | Nicotine salts | |
|---|---|---|
| How it feels | Harsher throat hit as strength rises | Smooth even at high strengths |
| Typical strengths | 0–18 mg/ml (US); capped at 20 mg/ml (UK/EU) | 20–50 mg/ml (US); capped at 20 mg/ml (UK/EU, Canada) |
| Used in | Sub-ohm tanks, mods, higher-power devices | Pods and other low-power devices |
| Never use in | — | High-power sub-ohm setups (too much nicotine per puff) |
The chemistry, briefly: salts add an acid (usually benzoic acid) that lowers the liquid’s pH, which makes high-strength nicotine smooth to inhale and faster to absorb. Our nicotine strength guide matches strengths to smoking habits and devices, and explains the lethal-dose myth — the old “30–60 mg kills” figure traces to a 1906 textbook error, though swallowed liquid is still a genuine emergency, especially for children.
Flavors: the categories
Flavors fall into a few families: tobacco (for ex-smokers who want familiarity), menthol and mint, fruit (the largest category by far), dessert and bakery, candy, and beverage flavors like coffee and cola. Two practical notes. First, heavily sweetened liquids gunk up coils faster — the sweetener, not the VG, is the culprit — so dessert vapers replace coils more often. Second, flavor bans exist in some jurisdictions and are tightening in others; the UK and EU already restrict where and how flavored products are sold. Check local rules before stocking up.
Reading the label
A reputable bottle tells you: the PG/VG ratio, the nicotine strength in mg/ml (and sometimes as a percentage — 1% is roughly 10 mg/ml), the bottle size, the ingredients, a batch number, a best-before date, and health warnings. What to watch for: no batch number, no manufacturer address, no childproof cap, or a nicotine strength that does not match what you ordered. Buy from authorized retailers, not from social-media sellers or market stalls — the 2019 EVALI outbreak was a contaminated-supply event, and the supply chain is the protection.
Storing vape juice
Keep bottles in a cool, dark place, tightly capped, away from direct sunlight and heat. Nicotine oxidizes with light, heat, and air exposure — the liquid darkens and the flavor degrades, and very old liquid tastes peppery and harsh. Always keep bottles out of reach of children and pets: swallowed e-liquid is a poisoning risk, and the sweet flavors and small bottles make it attractive to small children. If a child swallows any e-liquid, call Poison Control immediately (1-800-222-1222 in the US) — do not wait for symptoms.
A word on DIY mixing
Mixing your own liquid is possible and popular, but handling concentrated nicotine is genuinely hazardous: pure nicotine liquid can poison through skin contact, and a small miscalculation produces a dangerously strong mix. If you go down this road, use gloves and eye protection, mix in a ventilated area away from children and pets, label everything, and use a mixing calculator — never guess ratios. Our DIY vape juice guide covers the process; this warning is the part to read first.
What about the health side?
The NHS advises that nicotine vaping is less harmful than smoking and can help smokers quit, while being clear that vaping is not risk-free. The most rigorous evidence review, the National Academies’ 2018 report on over 800 studies, found conclusive evidence that switching completely from cigarettes reduces exposure to numerous toxicants — and insufficient evidence to judge long-term outcomes. The full findings are at doi.org/10.17226/24952. Our evidence review grades what is known and what is not.
Frequently asked questions
What is vape juice made of?
Propylene glycol, vegetable glycerin, flavorings, and usually nicotine. Some liquids add distilled water, sweeteners, or cooling agents. Nicotine-free liquids contain everything except the nicotine.
Are there different nicotine levels in vape juice?
Yes — from 0 mg/ml to 50 mg/ml in the US, in two forms: freebase (0–18 mg/ml typical, for higher-power devices) and nicotine salts (20–50 mg/ml, for low-power pods). The UK, EU, and Canada cap all nicotine liquids at 20 mg/ml.
How should vape juice be stored?
In a cool, dark place, tightly capped, away from heat and sunlight — and always out of reach of children and pets. Liquid that has darkened significantly or tastes peppery is oxidized and past its best.
What is the difference between PG and VG?
PG is thin, carries flavor well, and gives a stronger throat hit. VG is thick, produces denser vapor, and feels smoother. A 50/50 blend suits pods and mouth-to-lung devices; 70/30 VG suits sub-ohm tanks. See the PG vs VG comparison for the full trade-off.
Can I mix different vape juice flavors?
Yes — mixing finished liquids is safe as long as you keep track of the resulting nicotine strength, which will be somewhere between the two originals. Mixing from concentrates (DIY) is a different activity with real safety requirements; see the warning above.
For more on devices, e-liquids, and safety, browse the Vaping & E-Liquids hub.
Affiliate Disclosure
The CakeHeights Editorial Team is committed to providing accurate, research-backed information about cannabis and hemp products. Some links on this page are affiliate links, meaning we may earn a commission at no extra cost to you if you make a purchase through them. Our recommendations are based on independent research, testing, and analysis. We only promote products we believe offer genuine value to our readers. Learn more →
Leave a Reply